Inslogic
Inslogic LW-PLA Filament
Key Features
● Low density and lightweight
● Easy to print
● Satin texture, easy to apply
Inslogic LW-PLA Filament is a functional material, compatible with FDM 3D printers using 1.75 mm diameter filament with a precision of ±0.03 mm.
Inslogic LW-PLA (Lightweight PLA) is a foaming PLA filament designed to reduce part weight while maintaining structural integrity and print quality. Ideal for RC aircraft, cosplay props, and lightweight prototypes where weight savings are critical.
* Compatible with Bambu Lab AMS and A1 mini.
- Length: 350 m
- Net Weight: 0.8 kg
- Diameter: 1.75 mm ± 0.03 mm
- Tensile Strength: 28 MPa
- Elongation at Break: 24%
- Flexural Strength: 48 Mpa
- Flexural Modulus: 3600 Mpa
- Izod Impact, Notched: 3.2 KJ/m²
- Density: 0.84 g/cm³
- Heat Deflection Temperature at 0.45 MPa: 53 ℃
* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.
- Drying Setting: 50°C, 4h
- Nozzle Size: 0.4, 0.6mm
- Nozzle Temp & Printing Speed: 190-210°C at 30 - 50mm/s
- Bed Temp: 50-60°C
- Cooling Fan Speed: Part: 0%, Overhang: 70%
- Bed Type: Smooth PEI Sheet, High Temperature Plate(Glue required)
* The settings shown above are intended as a guide to help you discover your ideal print settings. While these settings should generally work for most printers, don't hesitate to experiment beyond these ranges if you believe it's suitable for your specific printer. Due to the numerous printer types, hot-ends, and printer offsets available, it's extremely challenging to provide a single, universally applicable setting.
Why Choose Inslogic LW-PLA Filament?
Inslogic LW-PLA (Lightweight PLA) is a foaming PLA filament designed to reduce part weight while maintaining structural integrity and print quality. Ideal for RC aircraft, cosplay props, and lightweight prototypes where weight savings are critical.
