Inslogic
Inslogic ABS-GF10 Filament
Key Features
- Ultra-high strength, 30% higher than ABS
- Heat resistance up to 104℃
- Low warping, no cracking
- Excellent Dimensional Stability
- Pre-dried for immediate use and optimal results
Inslogic ABS-GF10 Filament is an engineering-grade material, compatible with FDM 3D printers using 1.75 mm diameter filament with a precision of ±0.03 mm.
ABS-GF10 is a high-performance material reinforced with 10 wt% glass fiber, significantly improving strength and dimensional stability.
It offers 30% higher strength than standard ABS, prints more reliably, and supports open printing. Ideal for functional prototypes, drone components, molds, and other demanding applications.
Compared with regular ABS, ABS-GF10 outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping.
ABS-GF10 is ideal for mechanical parts due to the inherited water resistance, wear resistance, durability.
- Length: 350 m
- Tensile Strength: 54 MPa
- Elongation at Break: 10%
- Flexural Strength: 90 Mpa
- Flexural Modulus: 3490 Mpa
- Density: 1.106 g/cm³
- Izod Impact, Notched: 6.7 KJ/m²
- Heat Deflection Temperature at 0.45 MPa: 104 ℃
--------------------
1 kg Reusable Spool Specifications:
- Materials: PC
- Color: White grey
- Temperature Resistance: ≤110℃
- Spool & Cardboard Coil Weight: 232 ± 3 g
- Inner Hole Diameter: 55±0.1 mm
- Outer Diameter: 200±0.1 mm
- Width: 67±0.1 mm
* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.
- Drying Settings: 110°C for 4h
- Nozzle Size: 0.4, 0.6 mm
- Nozzle Temperature & Printing Speed: 260-280 °C, 50-100 mm/s
- Bed Temperature: 90 - 100 °C
- Cooling Fan Speed: On
- Bed Type: Textured PEI Sheet
* The settings displayed above are intended as guidance to help you find your optimal print settings. These ranges in settings should work for most printers. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.
- Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Instructions for using Inslogic reusable spool and refill filament
