Inslogic PP (Polypropylene) Filament

Inslogic PP (Polypropylene) Filament is a functional material, compatible with FDM 3D printers using 1.75 mm diameter filament with a precision of ±0.03 mm.

Low density and lightweight: With the same model weighing approximately 27% less than PLA.

Suitable for contact with food: One of the most beneficial uses of PP is to create food safe containers because PP is odorless and non toxic.

High chemical resistance: Excellent chemical resistance: stable in strong acids and alkalis (pH 0.5–14) without deformation or melting.

Highly resilient: Highly resilient, resistant to breakage, and offering excellent durability and fatigue resistance.

• Length: 385 m
• Net Weight: 0.8 kg
• Diameter: 1.75 mm ± 0.03 mm
• Tensile Strength: 21 MPa
• Elongation at Break: 999%
• Flexural Strength: 19 MPa
• Flexural Modulus: /
• Izod Impact, Notched: 6.5KJ/m²
• Density: 0.9 g/cm³
• Heat Deflection Temperature at 0.45 MPa: 54 ℃

* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.

• Medical applications
• Drone
• Electronic products
• Agricultural production
• Small parts

• Drying Setting: 50°C, 4-5h
• Nozzle Size: 0.4, 0.6mm
• Nozzle Temp & Printing Speed: 210 - 230°C ≤30mm/s
• Bed Temp: 50-60°C
• Cooling Fan Speed: 100%
• Bed Type: Textured PEI Sheet(Need to apply PP glue)

* The settings shown above are intended as a guide to help you discover your ideal print settings. While these settings should generally work for most printers, don't hesitate to experiment beyond these ranges if you believe it's suitable for your specific printer. Due to the numerous printer types, hot-ends, and printer offsets available, it's extremely challenging to provide a single, universally applicable setting.

• Technical Data Sheet (TDS)
• Safety Data Sheet (SDS)
• Instructions for using Inslogic reusable spool and refill filament